Toshiba Model 2000 PLC Modules – Overstock

Below is our listing overstock Toshiba PLC base racks, communication modules, I/O terminal units and accessories. For your control system procurement and replacement projects Martin Control & Equipment Company offers these genuine Toshiba parts. Contact us for availability.

GBU643D*

Part Number: GBU643D (often seen as “GBU643D*S”)
Description: Base Rack for S2T/S2 ‘Type 1 Light’ series. Four station bus slots, no dedicated I/O slots. (Not for PUM11 systems.)

GEN651A*

Part Number: GEN651A (often seen as “GEN651A*S”)
Description: Ethernet communication module, single-bus, 100 Base-TX, used with V2000/S2T systems.

GFR08

Part Number: GFR08
Description: Module reference in large-size series “V” controllers I/O list. (8-point (or “08”) serial bus/terminator/relay cable variant)

GFR10

Part Number: GFR10
Description: As above – 10-point/10-station variant of the “GFR” family within the V-Series controller I/O base list.

L2PU12

Part Number: L2PU12
Description: Loop-control module or sequence/loop module within Toshiba Integrated Controller V Series Model 2000. High-speed loop control edition.

NEM1306Z

Part Number: NEM1306Z
Description: Conduit box (NEMA 1) for Toshiba AS3 series A6-frame AC drives (accessory).

SPI01

Part Number: SPI01
Description: Pulse-input module, 4-points, voltage pulse up to 100 kHz / non-voltage contact 50 Hz, non-isolated, common to V-series controllers.

STC01

Part Number: STC01
Description: Thermocouple input module, 8 channels (types B, R, S, J, K, T, E), isolated. Common to V-series controllers.

USCB1

Part Number: USCB1
Description: Communication base unit (vertical type) for serial-bus terminal units; supports up to 15 units per serial bus channel; used with L2/L3 controllers.

UTBA1

Part Number: UTBA1
Description: Analog terminal-block unit (vertical type) for 8-point analog / 4-point pulse input/output (2 modules mounted). Supports modules like SAI01, SAO01, SPI01, etc.

UTBD1

Part Number: UTBD1
Description: Digital terminal-block unit (vertical type) for I/O mounting in Toshiba V-series controllers. (Referenced in list of terminal units)

ZCS006A1011

Part Number: ZCS006A1011
Description: Serial bus–related cable/terminator accessory (e.g., ZCS00x family) in Toshiba PLC I/O system. (Exact spec must be confirmed)

ZCS010A3011

Part Number: ZCS010A3011
Description: Serial bus/relay cable accessory (ZCS010-series) for Toshiba large-size V controller I/O and communication modules.

---

Notes & disclaimers:

• Descriptions are summary conditions only — confirm the exact revision, suffix (e.g., “*S”, “-S”), compatibility (rack generation, bus type) and firmware if applicable.
• Some parts (especially older rack modules) may be discontinued or limited-availability; lead times should be confirmed.
• We at Martin Control & Equipment Company maintain supply/repair relationships for Toshiba automation systems and can assist with sourcing or legacy support.
• If you require full factory data sheets, wiring diagrams or revision history we can supply them — let us know and we’ll retrieve the Toshiba PDF from the official Download Center.

For RFQ or availability, reference the full list above and let us know your quantity, condition (new/open, refurbished), required revision and whether you require factory shipping to your site or consignment stock.